Call us: +44 (0)1489 790049

A- A A+
ST95 30kN Double Bollard Rope Grip_product_product_product_productST95 30kN Double Bollard Rope Grip
Move your mouse over image or click to enlarge
ST95 30kN Double Bollard Rope Grip_product_product_product_product ST95 30kN Double Bollard Rope Grip ST95 30kN Double Bollard Rope Grip_product ST95 30kN Double Bollard Rope Grip_product

ST95 30kN Double Bollard Rope Grip

Price / kg:
Ask a question about this product

Product Description

30kN Double Bollard Grip ST95

Maximum Load



Sample Size

Maximum 8mm diameter


Sample Type

Ropes, wires, cables, etc



5 kg per pair.




The rope is wrapped around each bollard, once or twice, depending on it’s diameter and then the tail is clamped in a vice. The bollard diameter is 40mm. The vice will accommodate rope up to 8mm maximum. Friction between the bollards and the rope and the initial tension from the vice take the load applied by the tensile testing machine. If testing to BS EN919 then it should be noted that the ratio of bollard diameter to rope diameter should be a minimum of 10:1.


The grip is designed to be loaded as follows. Using the grip illustration opposite, take an anti-clockwise turn round the lower bollard, followed by a clockwise turn round the upper bollard and then into the vice. The turns will be slightly more than 360 degrees on each bollard. The sample must enter the top of the vice as this is curved to avoid chaffing the sample.

Our Location

Hours of Operation:

Customer service and office hours are
8:30 am - 5:00 pm Monday to Thursday

8:30 am - 3:30 pm Friday

Contact Us

Office: +44 (0) 1489 790049

Fax: +44 (0) 1489 790040


Our mailing address is:

Unit 1 Calcot Mount

Curdridge, Southampton


SO32 2BN

Registered in England No. 3070765





Translate Site

English Chinese (Simplified) French German Greek Italian Portuguese Russian Spanish



Site Map

Copyright © 2015 Seatallan Ltd. All rights reserved. Website Design by Akira Studio Ltd